Description
Parameters
Measurements
Description
Features
- This covered multi-purpose freight wagon is used for transportation of big volume goods as well as for palletised goods. The transported goods are protected against atmospheric agents.
- The wagon (”ll”) is equipped with an intermediate wall system. Considered are 4 pcs of intermediate walls as optional order.
- The wagon design meets the requirements of TSI, EN, UIC standards and has TEN GE marking for traffic operation.
Capabilities
- The side walls are easy manipulated by one person and they provide possibility that 50% of the wagon can be opened.
- Great loading space is accessible from ramps on both sides by industrial trucks.
- With special crane equipment it is possible to load the wagon from the top due to a narrow roof beam.
- Whole wagon space could be divided with intermediate walls into smaller separate loading sections.
- Intermediate walls serve also as fixation of transported load against longitudinal movement during transport operations.
Parameters
| Axle load | 22.5 t / axle |
| Track gauge | 1,435 mm |
| Loading gauge | G1-TSI |
| Brake regime | ”S” |
| Brake type | GP-A (K) |
| Max. speed at 90,0 t | 100 km/h |
| Max. speed at (unloaded) | 120 km/h |
| Climate condition | T1 |
| Rmin | 60.0 m |
| Length over buffers | 23,900 mm |
| Loading length | 22,640 mm |
| Loading width | 2,820 mm |
| Loading area (ll) | 63.3 m2?(62.05 m2) |
| Wagon volume (ll) | 170.0 m3?(168.7 m3) |
| Tare weight (ll) | ~ 27.4 t (~ 28.8 t) |
| Payload (ll) | ~ 62.6 t (~ 62.2 t) |
| Floor height | 1,200 mm |
| Bogie type | BA 629.4 (K) |
| Number of euro pallets | 63 |
Measurements
All measurements are in millimeters.
Note: The descriptions provided herein are for general information purposes only.
Covered wagons
