Description
Parameters
Measurements
Description
Features
- This two platformed articulated intermodal wagon on 3 bogies is suitable for carrying 20′, 30′ and 40′ containers as well as swap bodies in an efficient manner.
- The wagon design meets the requirements of TSI, EN, UIC standards and has TEN GE marking for traffic operation.
- The UIC 596-6 is fulfilled by the wagon that has also “C” marking on; a payload of 108.8 t on both platforms is possible.
Capabilities
Containers according to UIC 592 (ISO 668) and swap bodies according to UIC 592, in compliance with UIC 596-6:
- Series 1 freight containers – 1CX, 1C, 1CC, 1AX, 1A, 1AA, + 1BX, 1B, 1BB(1)(2)(3)
- Symmetrical swap bodies – (20), 40, + (30)(1), + (21), 22, 23, 24, (26), (29)(2), + (31)(3)
- Asymmetrical swap bodies – NA + (81), 82, (84), (85), (86)(1), + (60)(2)(3)
Loading possibilities are in accordance with loading diagram.
Parameters
| Axle load | 22.5 t / axle |
| Track gauge | 1,435 mm |
| Loading gauge | G1-TSI |
| Brake regime | “SS” and “S” |
| Brake type | GP-A (K) |
| Max. speed at 135,0 t | 100 km/h |
| Max. speed at 120,0 t | 120 km/h |
| Climate condition | T1 |
| Rmin (for single uncoupled wagon in any loaded condition) | 75.0 m |
| Length over buffers | 26,040 mm |
| Tare weight | ~27.0 t |
| Payload | ~108.0 t |
| Loading height | 1,155 mm |
| Bogie type | Y25Ls(s)1-KV |
| Number of ct. spigots | 16; 20; 24; 32; 40 |
Measurements
All measurements are in millimeters.
Note: The descriptions provided herein are for general information purposes only.
Intermodal wagons
