Zags 103 m³ | 4-axle tank wagon for Ammonia

Features

• This tank wagon is designed for transportation of anhydrous ammonia UN1005 and liquefied hydrocarbons (LPG) as per tank code P29BH.
• The wagon is designed and built in according to RID and TSI regulations and corresponding EN / UIC standards. The wagon has TEN GE marking for traffic operation.
• Underframe comply with EN 12663-2 and UIC 530-1 provisions for mounting of Automatic Coupler
• Optimized capacity to wagon weight for ammonia, anhydrous UN1005
• Tank head thickness according to RID TE 25 b)

Capabilities

• The wagon is equipped with bottom valves unloading-loading fittings which are hydraulically controlled on both wagon sides from the track level.
• There are T-pipes and side oblique valves DN 80 fitted for the liquid and gaseous phase. Additionally on the gas phase is a reduction (DN 80/DN 50) as a standard.
• Tank inspection is possible due to access through a DN 500 manway with a cover according EN 12561-6 located on the one of head tank.
• Ready for assembly sunshield and change of tank code on P27BH.
• The lowest temperature at which the tank can be filled is -40 °C.
• Different loading and unloading equipment fitted on the tank can be adapted in accordance with customer requirements
• Use of different types of wheelsets, axle boxes, brake blocks, buffers, draw gear etc.
• Position of the manhole in the tank head axis according to intellectual property No. Ru.068711
• Additional devices improving safety (option): anti-climbing systems, derailment detector device EDT101
• Protective shield according to RID TE 25 d), second platform and level gauge are an additional option [See picture]

*The tare weight of the wagon depends on the bogie type, wheelsets used and additional equipment.

All measurements are in millimeters.