Description
Parameters
Measurements
Description
Features
- This low two platformed intermodal wagon on 4 bogies (8 axles) is suitable for carrying 20‘ , 30‘, 40‘ containers and swap bodies classified in UIC 592 in symmetrical and asymmetrical load configurations on the entire length.
- The total length of the wagon is optimized using a short coupling system between the 2 low platforms.
- The wagon design meets the requirements of EN, UIC standards and has GE marking for traffic operation.
- The UIC 596-6 is fulfilled by the wagon that has also “C” marking on; a payload of 89.0 t on both platforms is possible.
Capabilities
Containers according to UIC 592 (ISO 668) and swap bodies according to UIC 592, in compliance with UIC 596-6:
- Series 1 freight containers – 1CX, 1C, 1CC, 1BX, 1B, 1BB, 1AX, 1A, 1AA n Symmetrical swap bodies – (20), (21), 22, 23, 24, (26), (30), (31), 40, 42, (44), (45)
- Asymmetrical swap bodies – (60), (81), 82, (84), (85), (86), (91), (94), 96
Loading possibilities are in accordance with loading diagram.
Parameters
| Axle load | 16.0 t / axle |
| Track gauge | 1,435 mm |
| Loading gauge | G1-TSI / W6a GB |
| Brake regime | “SS” |
| Brake type | GP-A (K) |
| Max. speed at 135,0 t | 100 km/h |
| Max. speed at 120,0 t | 120 km/h |
| Climate condition | T1 |
| Rmin | 75.0 m |
| Length over buffers | 36,440 mm |
| Tare weight | ~ 39.0 t |
| Payload | ~ 89.0 t |
| Loading height | 825 mm |
| Bogie type | Y33-K |
| Wheel diameter | 730 mm |
| Bogie wheel base | 2,000 mm |
| Coupling inner | Permanent |
| Number of ct. spigots | 32 |
Measurements
Note: The descriptions provided herein are for general information purposes only.

